Roofers in Burbank, CA

Every roof is priced after inspection, but as a rough guide, a typical single-family reroof in Burbank usually falls into a range set by size, pitch, and material — asphalt shingle is the most affordable, concrete or clay tile costs more, and a tile lift-and-relay that reuses your existing tile lands in between. We give you a firm written number after we've seen the roof, not a guess over the phone.

Yes. Nearly every California jurisdiction requires a permit to reroof, and Burbank is no exception — the permit is pulled through the local building or building & safety department and the job is inspected. We handle the permit and schedule the inspections as part of the work. If you're in an HOA, expect architectural review of the material and color as well, which we'll help you navigate.

Burbank sits in a high fire hazard severity zone, so your roof needs a Class A fire-rated assembly — the top rating — along with ember-resistant vents and no wood shake, consistent with California Building Code Chapter 7A. Class A asphalt shingle, concrete or clay tile, and metal assemblies all qualify. Insurers increasingly ask about roof class and age in these areas, and we can document the assembly for your carrier.

Yes. A lot of Burbank homes have rooftop solar, and a proper reroof means detaching the panels, replacing the roof underneath, and resetting them — not roofing around them. We coordinate the panel removal and reset so the roof under your array is done right.

The dry, milder months of spring and fall are best in Burbank, avoiding both peak summer heat and the winter storms.